Sharp 32R-S400 User Manual

35
AC I VATEDT
V – CH HIP AS B
PI IPDSALBDE
EEN
22
TV– Y
Channel No.
for Main Picture
Blue Screen
for Main Picture
AC I VATEDT
V – CH HIP AS BEEN
22
Main Picture
is viewable
Blue Screen
for Insert Picture
PIP (Picture In Picture) (Continued)
L To move the Inset Picture.
Press MOVE .
(Press the button again to move the Inset Picture to another
position.)
L Freeze-Frame Inset Pictures
• When the Inset Picture is on the screen, press FREEZE to freeze the
Inset Picture.
Only when the Main Picture is on the screen, press FREEZE to inset
a freeze-frame of the Main Picture.
• Press FREEZE again to remove the Inset Picture.
Note:
• When the Main Picture’s signal is black and white or the signal is lost, the Inset Picture may change
to black and white. In this case, the Inset Picture may appear with a bit of vertical jagged lines
depending on the type of receiving signal.
L How PIP behaves when V-CHIP BLOCK has been activated.
PIP is ON and Main Picture is blocked.
When the Main Picture is blocked, Main Picture
will change to blue screen and message “V-
CHIP Has Been Activated” will be displayed.
Main Picture Channel No. displays but Insert
Picture will be OFF.
This Message will remain on screen until V-CHIP
BLOCK is temporarily canceled or you change
the Main Picture to a TV program that is not
blocked.
PIP is ON and Insert Picture is blocked.
When the Insert Picture is blocked, Insert Picture
will change to a blue screen.
Main Picture is viewable but a message “V-CHIP
Has Been Activated” will be displayed in the
Main Picture.
This Message will remain on screen until V-CHIP
BLOCK is temporarily canceled or you change
the Insert Picture to a TV program that is not
blocked.
Note:
• Please refer to page 23 on how to temporarily canceled V-CHIP BLOCK.
34-35 32/36R-S400.p65e 16/4/01, 11:37 AM35

Sharp 32R-S400 Specifications

General

Brand	Sharp
Model	32R-S400
Category	CRT TV
Language	English