[] During viewing digital channel
"_ Repeat steps 1 to 2 of During viewing analog channel
2 Press VOL +/- to access the CLOSED CAPTION screen_
3 Press CH A/_F to select "CLOSED CAPTION SERVICE"
or "CLOSED CAPTION PREFERENCE" and then press
VOL +/- to enter to the selected mode screen.
[] CLOSED CAPTION SERVICE
(i) Press CH A/_F to select"CLOSED CAPTION
SERVICE".
Closed caption services toggles like below:
[] CLOSED CAPTION PREFERENCE
(i) Press CH ,&/V to select "FONT SIZE", "FONT
COLOR", "BACKGROUND COLOR" or "RESET 5.
(ii) Press VOL +/- to select desired setting.
The setting toggles as shown below:
FONT SIZE
FONT COLOR/BACKGROUND COLOR
RESET
, For resetting all adjustment items to the factory preset
values.
CLOSED CAPTION SERVICE
(CLOSED CAPTION screen)
SELECT SERVICE : OFF
(CLOSED CAPTION SERVICE scre_
FONT SIZE : DEFAULT
FONT SIZE : OEFAULT
FONT COLOR : DEFAULT
o Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor
or if there are problems at the broadcast source. This does not necessarily indicate a problem with
your TV.
o If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION
broadcast, the closed captions will disappear momentarily
o If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become
dark and blank for some programs.. Should this occur, switch the Closed Caption mode to "OFF"
1E
To Next Page
Loading...
Need help?
General
