Why doesn't my device show up in the CEC Device list on my Sharp LC-32LB370U?
If a device does not show up in the CEC Device list on your Sharp TV, ensure the device is turned on. Make sure the HDMI cable is securely connected to both the TV and the device. Verify the device is connected with an HDMI cable and that the CEC Control feature is turned on. Also, confirm that the device is CEC-compatible by checking its documentation.
How do I remove the retail banner from my Sharp LC-32LB370U?
If a retail banner is displayed on your Sharp TV, you selected “Store” mode when you ran the EZ SETUP wizard. Reset your TV to the factory defaults, then select Home on the What is your viewing environment screen.
Why does my Sharp LC-32LB370U only show snow?
If only snow (noise) appears on the screen of your Sharp TV, try another channel as the station may be experiencing problems. Ensure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, see “Checking the digital signal strength” on page 52. If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
Why does my Sharp TV keep turning off?
If your Sharp TV keeps turning off, make sure that the sleep timer is not turned on.
What to do if my Sharp LC-32LB370U TV says no signal?
If the Sharp TV displays a 'No Signal' error message, first press the INPUT button to ensure you've selected the correct input for your device or service. If you're using a cable or satellite box, use its remote to change channels and make sure the correct input is selected on the TV to view those channels.
Why is there no picture or sound on my Sharp LC-32LB370U?
If your Sharp TV has no picture and no sound, try the following: * Press the power button on the TV or remote. * Ensure the 'Audio Only' option is off. * Check that video cables are securely connected. * Adjust the contrast and brightness. * Confirm the power cord is plugged in. * Select the correct video input source. * Try another channel. * Ensure the incoming signal is compatible. * Verify the antenna or cable TV is correctly connected. * Check closed caption settings.
Why does my Sharp LC-32LB370U TV have good picture but no sound?
If your Sharp TV has good picture but no sound, first increase the volume and ensure the sound isn't muted. Check that the correct audio mode is selected and the audio cables are securely connected to the TV. Also, make sure the antenna or cable TV is correctly and securely connected. If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, see “Checking the digital signal strength” on page 52. The audio cables you are using may be faulty, so try a new set.
Why doesn't my Sharp LC-32LB370U turn on when I turn on my device?
If your Sharp TV does not turn on when you turn on your device, make sure that the CEC Control feature is turned on. Ensure that TV Auto Power On is set to On in the CEC menu. The device may not support this feature, so consult its documentation.
Why doesn't my device turn off when I turn off my Sharp LC-32LB370U TV?
If your device does not turn off when you turn off your Sharp TV, ensure that the CEC Control feature is turned on. Make sure that Device Auto Power Off is set to On on the CEC menu. Note that the device may not support this feature, so check its documentation for more information.
How do I fix double images on my Sharp LC-32LB370U?
If you're seeing double images on your Sharp TV, use a highly directional outdoor antenna, cable TV, or satellite TV.
Guidelines for safe TV placement and handling to prevent injury.
Covers warnings about water, heat, ventilation, and electrical hazards.
Instructions for proper cord protection, attachments, and handling.
Includes servicing, grounding, condensation, and mobile phone warnings.
Details on power source, servicing instructions, and damage requiring service.
Guidance on outdoor antenna grounding, CATV installation, and condensation.
Covers mobile phone warnings, end-of-life disposal, and non-active pixels.
Cautions regarding wall-mount bracket installation and safety.
Details on mounting hole dimensions and screw types for wall mounting.
Step-by-step guide for attaching the TV stand.
Important notes regarding stand installation and storage.
Describes the function and connection for HDMI 3, HDMI 2, and HDMI 1/ARC ports.
Explains the use of the USB port for flash drives and picture files.
Details the /AUDIO OUT and DIGITAL AUDIO OUTPUT ports.
Explains the ANT/CABLE jack and Y/VIDEO, PB/PR, L/R audio jacks.
Identifies and explains the function of each button on the remote.
Provides important cautions and notes for using the remote.
Lists all items included in the TV package.
Explains the function of the buttons located on the front of the TV.
Step-by-step guide for connecting to a cable/satellite box using HDMI.
Instructions for connecting devices using component video cables.
Steps for connecting devices using AV composite video cables.
Guide for connecting to TV using a coaxial cable.
Instructions for connecting antenna or cable TV directly to the TV.
Steps to connect DVD or Blu-ray players using HDMI.
Instructions for connecting players using component video cables.
Steps for connecting players using AV composite video cables.
Guide for connecting game consoles using HDMI.
Instructions for connecting game consoles using component video.
Steps for connecting game consoles using AV composite video.
Guide for connecting computers using HDMI.
Steps for connecting and using a USB flash drive for photos.
Instructions for connecting headphones to the audio out jack.
Steps for connecting speakers/sound bars via digital audio.
Instructions for connecting speakers/sound bars via analog audio.
Diagram showing connections for a multi-device home theater system.
Steps to connect the AC power cord to the TV and power outlet.
Guide on how to insert batteries into the remote control.
Advice on pointing the remote control towards the TV sensor.
Instructions for programming universal remote controls for the TV.
How to access and view universal remote control codes on the TV.
Steps for turning on the TV and starting the initial setup wizard.
Guide to customizing settings like region, language, and time during setup.
Steps for setting up channels, including cable, antenna, or none.
How to label connected devices for easier input selection.
Overview of how to navigate through the TV's on-screen menus.
Explains the Picture and Sound menu options.
Explains how to use remote buttons to navigate menus.
Shows how to access Channels, Settings, and Photos menus.
How to select channels, view information, and adjust volume.
Explains how to use HDMI CEC for device control.
Steps to turn the main CEC Control feature on or off.
How to configure Device Auto Power Off and TV Auto Power On.
How to turn the Audio Return Channel feature on or off.
How to view a list of connected CEC-compatible devices.
Steps to select a CEC-compatible device from a list.
How to open the root menu of a CEC-compatible device.
How to switch to USB mode and browse photo files.
How to browse and view favorite photos from a USB drive.
Steps to start and control a photo slideshow from USB.
Explains settings like Backlight, Brightness, Contrast, and Color.
Details on advanced settings like Tint, Sharpness, and custom picture modes.
Explains various aspect ratio options like Normal, Zoom, Wide, and Cinema.
How to use the Auto View Mode for automatic aspect ratio adjustment.
How to select different sound modes like Standard, Movie, and Music.
Explains features like Voice, Balance, Bass, and Treble.
How to select audio output modes like Headphones, Analog TV, and Surround Sound.
Steps to perform an automatic scan for available channels.
How to hide channels from the channel list to skip them.
How to create and manage a list of favorite channels.
How to access and select channels from the favorite list.
Steps to add or change labels for TV channels.
How to check the digital signal strength for optimal picture quality.
Guide to setting up parental controls and passwords.
How to block TV programs that do not have a rating.
Steps for changing the parental control password.
How to set parental control levels based on US and Canadian ratings.
How to configure V-Chip ratings for US and Canadian content.
How to lock the physical buttons on the TV using the remote.
How to select analog closed captioning modes (CC1-CC4).
How to select digital closed captioning modes.
How to customize digital closed captioning style, font, and colors.
Steps to set the current time and date on the TV.
How to set the sleep timer to automatically turn off the TV.
How to change the TV's menu language.
How to turn the Input Sensor on or off for auto input detection.
How to label connected input sources for easier identification.
Instructions for cleaning the TV cabinet and screen.
How to access and view the TV's system information.
Guidance on where to find more information for troubleshooting.
Steps to update the TV's firmware using a USB flash drive.
How to reset all TV settings to their factory defaults.
Solutions for common picture problems like no screen display or poor quality.
Solutions for common audio problems like no sound or poor sound quality.
Solutions for screen issues like dots, lines, or double images.
Troubleshooting for sound issues and audio cable connections.
Solutions for problems where the remote control is not functioning.
Common issues like no channels or error messages.
Troubleshooting steps when a CEC device does not appear on the TV.
Solutions for issues with CEC devices not turning on or off with the TV.
How to manage the Audio Return Channel CEC setting.
What to do if a device is not supported by the CEC feature.
Detailed dimensions and weight of the TV with and without stand.
Information on display type, resolution, refresh rate, and aspect ratio.
Details on power consumption, input type, and power requirements.
Includes specs for Wi-Fi, Internet, OSD languages, and VESA mounts.
Legal compliance information regarding FCC rules and radio frequency.
Information on Dolby Digital, DTS, and HDMI licensing.
Details about open source software used in the product.
Details of the limited warranty coverage for Sharp Televisions.
List of conditions and situations not covered by the warranty.
Instructions on how to get warranty service and contact support.
General| Comb filter | 3D |
|---|---|
| Screen shape | Flat |
| Response time | - ms |
| Display diagonal | 31.5 \ |
| Display brightness | - cd/m² |
| LED backlighting type | Direct-LED |
| Supported video modes | 1080p |
| Contrast ratio (dynamic) | 2000000:1 |
| Screen format adjustments | 16:9 |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Motion interpolation technology | - |
| 3D type | Active |
| Tuner type | Analog & digital |
| Number of tuners | 2 tuner(s) |
| Analog signal format system | NTSC |
| Digital signal format system | ATSC |
| Audio system | DTS Sound |
| Audio decoders | DTS |
| RMS rated power | 5 W |
| Number of speakers | 2 |
| HDMI ports quantity | 3 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | 1 |
| Consumer Electronics Control (CEC) | Aquos Link |
| On Screen Display (OSD) languages | ENG, ESP, FRE |
| Product color | Black |
| Panel mounting interface | 100 x 100 mm |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 47 W |
Weight and Dimensions| Depth (with stand) | 184 mm |
|---|---|
| Height (with stand) | 464 mm |
| Weight (with stand) | 5100 g |
| Depth (without stand) | 64 mm |
| Width (without stand) | 727 mm |
| Height (without stand) | 437 mm |
| Weight (without stand) | 4900 g |
To Next Page