Sharp LC-32LB370U User Manual

35
LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
9 Press W X or ENTER to highlight Hour, Minute, or the
AM/PM field, then press
S or T adjust the option. When
you are finished, use the arrow buttons to highlight Next,
then press ENTER.
10 Press
S or T to highlight a video input source, then press X
to move to the label area.
11 Press
S or T to highlight a preset label or Custom.
12 If you select a preset label, press ENTER. The video input
box on the left is selected so you can label a different video
input source.
OR
If you select Custom, press ENTER, then press
S or T to
enter the first character in your custom label, then press X
to move to the next character position. Use the arrow
buttons to enter additional characters or to move from
character to character. You can enter 10 characters (letters
or numbers). When you have finished creating your label,
press ENTER. The video input box on the left is selected so
you can label a different video input source.
13 Repeat Steps 10 through 12 to label additional video input
sources.
14 When you have finished creating input labels, use the arrow
buttons to highlight Next, then press ENTER.
Finish the wizard
15 Press
S or T to highlight Cable/Satellite Box, Cable from
the wall, or Antenna, then press ENTER.
•If you select Cable/Satellite Box, a screen opens that
shows you the ways you can connect the box.
Press ENTER.
•If you select Cable from the wall or Antenna, your TV
starts scanning for channels and displays a progress
screen. The scan may take several minutes.
When a message tells you that setup is complete, press
ENTER to close the menu.
16 Press ENTER to close the wizard. If you selected:
• Cable from the wall or Antenna, your TV tunes to the
first channel it found in the scan.
• Cable/Satellite box, press INPUT to open the INPUT
SOURCE list, press
S or T to select the video input (HDMI,
Component, or AV) you connected the box to, then press
ENTER. Your TV switches to the input you selected.
Note
You can press EXIT, or select Skip and press
ENTER, to stop the auto channel search, but
you will need to run the auto channel
search again to create a channel list.

Sharp LC-32LB370U Specifications

General

Comb filter	3D
Screen shape	Flat
Response time	- ms
Display diagonal	31.5 \
Display brightness	- cd/m²
LED backlighting type	Direct-LED
Supported video modes	1080p
Contrast ratio (dynamic)	2000000:1
Screen format adjustments	16:9
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	-
3D type	Active
Tuner type	Analog & digital
Number of tuners	2 tuner(s)
Analog signal format system	NTSC
Digital signal format system	ATSC
Audio system	DTS Sound
Audio decoders	DTS
RMS rated power	5 W
Number of speakers	2
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Consumer Electronics Control (CEC)	Aquos Link
On Screen Display (OSD) languages	ENG, ESP, FRE
Product color	Black
Panel mounting interface	100 x 100 mm
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	47 W

Weight and Dimensions

Depth (with stand)	184 mm
Height (with stand)	464 mm
Weight (with stand)	5100 g
Depth (without stand)	64 mm
Width (without stand)	727 mm
Height (without stand)	437 mm
Weight (without stand)	4900 g