Sharp 50BL2EA

44
- SOUND MODE: Adjust the current sound mode.
- TREBLE: Adjusts the treble default value for the current sound mode.
- BASS: Adjusts the bass default value for the current sound mode.
- 100HZ: Adjusts the 100HZ default value for the current sound mode.
- 350HZ: Adjusts the 350HZ default value for the current sound mode.
- 1.5KHZ: Adjusts the 1.5KHZ default value for the current sound mode.
- 3.5KHZ: Adjusts the 3.5KHZ default value for the current sound mode.
- 10KHZ: Adjusts the 10KHZ default value for the current sound mode.
BALANCE
Adjust the channel balance of the sound.
PRESCALE
Adjust the front end audio gain, currently no eect
SPEAKER DELAY
Adjust Speaker audio delay.
SPDIF DELAY(SPDIF)
Adjust SPDIF audio delay.
AVC
- AVC SWITCH: Adjust the AVC switch.
- ATTACK TIME: Adjust the AVC attack time, no eect.
- RELASE: Adjust the AVC attack time, no eect.
- THRESHOLD: Adjust the AVC amplitude value.
DRC
- ON/OFF: Adjust the switch of DRC.
- DRC: Adjust the value of DRC.
PEQ
PEQ FO1,FO2,FO3,FO4,FO5
Five PEQ frequence for user: FO1,FO2,FO3,FO4,FO5
COARSE (no eect)
FINE
GAIN
Q
- HPF: (no eect)
- DAP: (no eect)
- DTD VX: (no eect)
5.7 GENERAL SETTING
POWER MODE
Adjust the power on state.
- STANDBY: Power on standby.
- ON: Power on.
- LAST: Power on last,no eect.
TEST PATTERN
Solid color test picture, issued by the internal chip, the
user test some features of the pattern.