Sharp 50BL2EA

46
PANEL OFF TIMING 1
Adjust the screen power-o timing.
PANEL OFF TIMING 2
Adjust the screen power-o timing.
5.10 EMC SETTING
MIU RANGE (KHZ)
No eect.
MIU STEP(%)
No eect.
LVDS RANGE (KHZ)
Adjust the frequency range of LVDS spread spectrum, the adjustment range is from 20khz to
100khz.
LVDS STEP(%)
Adjust the amplitude of the LVDS spread spectrum, the adjustment range is from 0% to 6%.
5.11 SYSTEM INFO
BOARD
Display the current board model.
HDCP1.4
Display the current record of HDCP1.4 le serial num-
ber. If the light is red, HDCP1.4 is burned failed. If the
light is green, it is on behalf of successful burning.
HDCP2.2
Display the current record of HDCP2.2 le serial num-
ber. If the light is red, HDCP2.2 is burned failed. If the
light is green, it is on behalf of successful burning.
WIDEVINE
Displays the current record of WIDEVINE le serial
number.
ATTEST
Displays the current record of ATTEST le serial number.
ETHERNET MAC
Displays the MAC address of the current wired network. If the light is red, MAC is burned failed. If
the light is green, it is on behalf of successful burning.
IP
Displays the current network IP address.
Build time
Displays the build time of the current software.
CI+ KEY
Show if CI + KEY is burned in successfully.