Sharp 50BL2EA

45
INPUT/EXPORT
User debug data import / export.
- CHANNEL EXPORT: Export the current channel data to the U disk root directory, save the le
name MTK_CHANNEL_TABLE.json
- USB CHANNEL IMPORT: Import the preset customer channel table data for the current
channel data.
- LOGO EXPORT: Export the current boot logo to the U disk root directory, save the le name
for the logo.jpg
- LOGO IMPORT: Import the U disk root directory le logo.jpg into the current boot logo.
ONE BIN CONFIG EXPORT
(no eect)
PROJECT ID IMPORT
(no eect)
TV CONFIG EXPORT
(no eect)
5.8 DEBUG
UART DEBUG
For deignger only.
ADB ENABLE
Turn the ADB debug switch on or o.
BACKLIGHT DEBUG
Adjust the backlight value.
RUNCMD
Run some specic commands.
5.9 PANEL SETTING
BACKLIGHT VALUE
Debug the current backlight duty cycle.
BACKLIGHT PWM PREQ
Adjust the backlight pwm preq value.
DRV CURRENT
Adjust the current for driving the panel.
PANEL DUAL PORT
Set Dual Port for panel.
PANEL ON TIMING 1
Adjust the screen power-on timing.
PANEL ON TIMING 2
Adjust the screen power-on timing.