Sharp 50BL2EA - Page 53

53
• Connect serial tool and put {panel setting le} and Customer_1.ini to USB device.
• Insert USB to mainboard.
• Input “su” to get root authority
• Input “mount -o rw,remount /vendor/tvcong” to mount tvcong
• Input “ls /mnt/media_rw/” to get {USB tag}
• Input “cp /mnt/media_rw/ {USB tag}/{panel setting le} /vendor/tvcong/cong/panel/”
Example:
“cp /mnt/media_rw/79F0-8618/ID_PNL_UHD_LSC490FN02.ini /vendor/tvcong/cong/pan-
el/”
• Input “cp /mnt/media_rw/{USB tag}/Customer_1.ini /vendor/tvcong/cong/model/”
Example:
cp /mnt/media_rw/79F0-8618/ID_PNL_UHD_LSC490FN02.ini /vendor/tvcong/cong/panel/
• Input “sync”
• AC o and hold on enter AC on to enter mboot
• Input
setenv db_table 0
saveenv
reset
Backup software(without hashkey):
http://fs.cvte.com/getFile.php?uuid=a5a83d98-25cf-11e9-a40a-00505690c454