EN 10
Part Names
Remote Control Unit
1 Signal transmitter
2 Operation buttons
Check the following before requesting repairs.
Problem Possible Solution
• Power is not turned on. • Check if the AC cord is connected properly and plugged securely into the
outlet.
• When the lamp is not lit, turn on the power using the power button on the
main body.
• An indication Temperature
or Temperature of Monitor
blinks, and power is turned off
automatically.
• The temperature of the Monitor has risen. Get rid of the causes of the
increased temperature (such as direct sunlight or hot air).
• Check if the Monitor is installed in a condition or location where the
temperature rise occurs easily. Do not cover the ventilation opening on the
back of the main body when installing.
• Frequently remove dust from internal equipment or ventilation opening if it
can be removed from the outside. For removing dust inside the equipment,
consult your dealer.
Troubleshooting
To Next Page
Loading...
Need help?
General
