EN 7
ENGLISHDEUTSCH ESPAÑOLITALIANO FRANÇAISРУССКИЙPOLSKI
Connecting AC Cord
Choosing a AC cord
This monitor is supplied with 2 AC cords for 200-240 V and 100-120 V.
CAUTION
• Use the appropriate AC cord for the power outlet.
NOTE
• If you are not sure of which type to use, contact your local service personnel.
• When using this monitor at 100-120 V, brightness will be decrease.
Connecting AC Cord
Do not turn on the power before completing connection.
IMPORTANT
• Connect the plug of the AC cord securely so that it is not dislocated.
• Do not disconnect the power plug or turn off the power supply suddenly while the product is in use. It may result in product
damage.
Connect the supplied AC cord to “AC IN” of the Monitor, and connect the plug into the power outlet.
Power input terminal
For power outlet
• Place the Monitor in a location near
a power outlet and make sure the
power plug can be reached easily.
q
Rear side of Monitor
NOTE
• Turning off the power of the Monitor may take a while. (This time is required for storing the Monitor’s internal information to the
memory.)
• For a complete electrical disconnection, pull out the main plug.
Power consumption
• There is small power consumption while the AC cord is connected even after power has been turned off by the
power button of the Monitor.
To Next Page
Loading...
Need help?
General
