Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. Connecting Other
Devices
1. Connecting 8K Output-
compatible
Device/Quad-screen
display（4K or less)
5. Connecting 4K Output-
compatible Device
7. Viewing HDR Video
(INPUT1, INPUT7,
INPUT8)
9. Using the HDMI CEC
11. Connecting Recorder,
Player, etc.
21. Connecting Audio
Device
22. Connecting PC
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
＞
＜
Connecting Other Devices
Connecting PC
Using as a monitor for P
NOTE
• When a certain type of PC is connected to the Monitor, the PC screen may fail to display properly or completely even if the input signal is supported by the Monitor.
•"Out of range" message will be displayed if an unsupported signal is input. In such situation, refer to the operation manual of the connected device and change to the
supported signal.
• The selectable screen size may vary depending on the input signal from PC. For information on the screen size types,
see page 5-25.
• For particular input signals, on-screen letters may appear blurred if certain conditions are met.
5-24
4/9/2020 Sharp operation manual
To Next Page
Loading...
Need help?
General
