Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. Connecting Other
Devices
6. Operating the Monitor
Using a PC (IP control)
1. Connecting the Monitor
and PC
3. Settings to operate the
Monitor
4. Command list
7. Troubleshooting
8. Specifications, etc.
Ver. 1.00
＞
＜
Operating the Monitor Using a PC (IP control)
Command list
Function “A”part “B”part Part operation description Remarks
Picture Backlight VLMP -16 to 16 Backlight setup
Contrast CONT 0 to 40 Contrast setup
Brightness BLVL -30 to 30 Brightness setup
Color COLR -30 to 30 Color setup
Tint TINT -30 to 30 Tint setup
Sharpness SHRP 0 to 20 Sharpness setup
Volume VOLM 0 to 100 Volume value
Balance SBAL -30 to 30 Speaker output balance setup
Screen
Horizontal position HPOS
*
Moving value
PC input (
*
)
Vertical position VPOS
*
Moving value
PC input (
*
)
Clock frequency CLCK
*
Moving value
PC input (
*
)
Clock phase PHSE
*
Moving value
PC input (
*
)
*
The range varies depending on input, signal or screen size.
6-5
4/8/2020 Sharp operation manual
To Next Page
Loading...
