Sharp 8M-B120C - Page 120

Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. Connecting Other
Devices
6. Operating the Monitor
Using a PC (IP control)
1. Connecting the Monitor
and PC
3. Settings to operate the
Monitor
4. Command list
7. Troubleshooting
8. Specifications, etc.
Ver. 1.00
＞
＜
Operating the Monitor Using a PC (IP control)
Command list
• Any commands not listed in the following table are out of operation guarantee range.
Function “A”part “B”part Part operation description Remarks
Power POWR 0 Power off Transition to standby
1 Power on Return from standby*
Input change Toggle ITGD 0 (Toggle)
INPUT 1 to 4 (HDMI) IAVD 1 to 4 (Input terminal number) Change to INPUT 1 to INPUT 4
INPUT 5 (video) IAVD 5 Change to INPUT 5
INPUT 6 (analog RGB) IAVD 6 Change to INPUT 6
INPUT 7 (8K: HDMI×4) IAVD 7 Change to INPUT 7
INPUT 8 (8K) IAVD 8 Change to INPUT 8
AV MODE AVMD 0 (Toggle) Toggled among currently selectable items
504 USER1
505 USER2
506 USER3
7PC
500 PC2
9sRGB
6 DYNAMIC
6-4
4/22/2020 Sharp operation manual