Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. Connecting Other
Devices
1. Connecting 8K Output-
compatible
Device/Quad-screen
display（4K or less)
5. Connecting 4K Output-
compatible Device
7. Viewing HDR Video
(INPUT1, INPUT7,
INPUT8)
9. Using the HDMI CEC
11. Connecting Recorder,
Player, etc.
21. Connecting Audio
Device
22. Connecting PC
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
＞
＜
Connecting Other Devices
Connecting PC
hen the monitor is connected to a PC with analog RGB output terminal (analog connection)
• Be sure to use the supplied conversion cable.When using any conversion cable other than the supplied one, the Monitor may not operate properly, or a part may be broken.
• A commercially available D-sub cable and an audio cable are required.
• Use an audio cable that is compatible with the PC terminal.
• After switching to INPUT 6, select "Setup" - " (Option)" -"Terminal setting" - "INPUT6 audio setting" from the Menu, and then select "Analog audio input".
5-29
4/9/2020 Sharp operation manual
To Next Page
Loading...
Need help?
General
