Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. Connecting Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
1. If You Suspect a
Problem
9. If Error Message
Appears
11. What If
8. Specifications, etc.
Ver. 1.00
＞
＜
Troubleshooting
If Error Message Appears
Message concerning USB Media
On-screen error message example Solution
The power supply requirement of the connected USB device is too large. After turning power off the Monitor, connect only
necessary USB devices.
USB inrush current has occurred.It can occur when multiple USB devices are connected to
the Monitor.
Turn off the Monitor, and then disconnect any unnecessary USB devices.
Cannot display the data.
Data in any format other than JPEG, which is compatible with the Monitor, or corrupted
data cannot be displayed.
7-9
4/8/2020 Sharp operation manual
To Next Page
Loading...
Need help?
General
