Sharp 8M-B120C - Page 49

Contents
1. Part Names
2. Basic Operation
3. Menu Operation
1. How to Use Menu
2. How to Use Setup Menu
3. List of Setup Menu
Items
44. How to Use Application
Menu
45. Entering Letters
(Software Keyboard)
4. USB Media
5. Connecting Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
8. Specifications, etc.
Ver. 1.00
＞
＜
Menu Operation
List of Setup Menu Items
Terminal setting (Continue)
Headphone
• Switches the audio sound between speakers and headphones during the use of the headphones.
Menu item name Setup
Headphone
Mode1
This is intended to listen to the Monitor with the headphones alone.Once you connect the
headphones, no sound will come out of the speakers.
Mode2
Sound comes out of the speakers even after the headphones are connected.This is useful for
two people with different needs (one having difficulty listening to the Monitor with the speakers
alone and the other not wanting the volume of the speakers to be too loud) to enjoy watching the
Monitor together.
NOTE
About volume adjustment during "Mode2"
• The speaker volume is adjusted by using the remote control.
• The headphone volume is adjusted by using the volume (+ / -) button on Monitor.
• Even if the MUTE button on the remote control is pressed, the volume of the headphones would not become "0".
3-34
4/8/2020 Sharp operation manual