Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
1. Before Using USB
Media
7. Enjoying Photo
21. Enjoying Music
24. Enjoying Video
5. Connecting Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
8. Specifications, etc.
Ver. 1.00
＞
＜
USB Media
Enjoying Photo
Setting up slide show
1. Press OPTION on the photo list screen to display the function menu.
2. Press / to select "Slide Show Setup", and then press ENTER
3. Press / to select the setting, and then press ENTER
Slide show interval
• Set the time duration before switching to the next picture.
• Depending on the photo, the display may not be switched according to the set time.
Slide show off timer setting
• Set the timer for the slide show. The power will automatically turn off after the set time duration.
• This is a function that can be helpful should you forget to turn off the power supply when using this machine as a
large screen photo frame.
• The timer will start only during slide show operation.
Low brightness mode
• Reduces glare so that the slide show can be enjoyed better.
• Even when displaying a slide show for a long duration, the power consumption can be reduced to a certain
degree.
(The power consumption reduction depends on the environment and the photos.)
4-14
4/8/2020 Sharp operation manual
To Next Page
Loading...
Need help?
General
