Sharp 8M-B32C1 - Connecting the Power Cord; Binding Cables

13
E
Connecting the Power Cord
Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input
terminal.
3. Plug the power cord (supplied) into the power outlet.
2
1
For power
outlet
3
AC input
terminal
Power cord (Supplied)
Main power
switch
Binding Cables
The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp.
Insert the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables.
Cable clamp
attachment
Cable
Cable clamp