14
E
Caution
• Turn on the monitor first before turning on the computer or
playback device.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.
Turning on the main power
Main power switch
Off mode, when main power is off.
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• For a complete electrical disconnection, pull out the main
plug.
Turning Power On/Off
Turning power on/off
Press the POWER button to turn the power ON/OFF.
Wait for 15 minutes or more before use to stabilize the image
quality.
RETURN
ENTER
MENU
C2C1
INPUT
Status Status of the monitor
Green lit Power on
Not lit Power off (Standby state*)
Orange lit Input signal waiting state
* Standby mode
TIPS
• When the main power switch is off, the monitor cannot be
turned on.
• If the monitor is in the input signal waiting state and you
press the POWER button, the monitor enters standby state.
• To disable the logo screen from displaying when turning the
power ON, set LOGO SCREEN to OFF on the OTHERS
menu. (See page 23.)
To Next Page
Loading...
Need help?
General
