34
AH-X079E/X099E
AY-X079E/X099E
22. To remove the evaporator, remove the tube holder on
the rear side of the cabinet, slightly lift the left side, slide
it to the right, and remove it from the cabinet, pulling it
toward you.
3. Remove the cord holder fastening screw of the power
supply cord.
How to remove the electric control box.
1. Remove the indicator assembly.
(Press and spread the upper hook, and the indicator
will be ready for removal.)
2. Remove the fastening screw of the terminal board.
4. Remove the terminal board fastening screw of the
power supply cord.
5. Remove the thermostat holder from the control box.
To Next Page
Loading...
