EasyManuals Logo

Sharp AH-XP24UHD User Manual

Sharp AH-XP24UHD
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
EN-4
HOW TO USE THE REMOTE CONTROL
Point the remote control towards the
receiver window and press the desired
button. The unit generates a beep when
it receives the signal.
Make sure nothing, such as curtains, block the
signal receiver window.
The signal effective distance is 7 m.
CAUTION:
Do not expose the receiver window to direct
sunlight. This may adversely affect its operation.
Use of certain uorescent lamp in the same
room may interfere with transmission of the
signal.
Do not leave the remote control in direct
sunlight or near a heater. Protect the remote
control from moisture and shock.
LOADING BATTERIES
1
Remove the battery cover.
2
Insert two batteries.
(AAA(R03))
Make sure the (+) and (-) polarities are
correctly aligned.
3
Reinstall the battery cover.
4
Press the RESET button using a
thin stick.
NOTE:
The battery life is approximately 1 year in
normal use.
When replacing the batteries, always change
both and use the same type.
If you will not be using the unit for a long time,
remove the batteries from the remote control.
USING THE REMOTE CONTROL
Battery cover
RESET button
Use this mode when the remote control
is not available.
TO TURN ON
Press the AUX button.
The Green OPERATION lamp ( ) will
light up and the unit will start operating in the
AUTO mode.
The fan speed and temperature setting are
set to AUTO.
TO TURN OFF
Press the AUX button again.
The Green OPERATION lamp ( ) will turn off.
AUXILIARY MODE
TIPS ON SAVING ENERGY
Below are some simple ways to save
energy when you use your air conditioner.
Set the proper temperature
Setting the temperature lower than necessary
during cooling operation will result in
increased power consumption.
Block direct sunlight and prevent drafts
Blocking direct sunlight during cooling operation
will reduce power consumption.
Close the windows and doors during cooling
and heating operations.
Keep lter clean to ensure the most
ef cient operation
Disconnect
the power cord from the wall
outlet or turn off the circuit breaker
when
the unit is not used for an extended
period time
The indoor unit still consumes a small amount
of power when it is not operating.
7 m
Receiver
window
AUX
AH-XP18SHV-1 (A889)_EN.indd EN-4AH-XP18SHV-1 (A889)_EN.indd EN-4 11/8/2559 BE 2:36 PM11/8/2559 BE 2:36 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp AH-XP24UHD and is the answer not in the manual?

Sharp AH-XP24UHD Specifications

General IconGeneral
BrandSharp
ModelAH-XP24UHD
CategoryAir Conditioner
LanguageEnglish

Related product manuals