Sharp AL-1631 - User Manual

Other manuals for Sharp AL-1631

Parts Manual20 pages

Questions and Answers

N
nalvarezJul 25, 2025
How to remove dust, dirt, smudges that appear on copies of Sharp AL-1631?
- A
  Anthony PetersonJul 26, 2025
  Dust, dirt, or smudges appearing on copies from your Sharp All in One Printer may be due to a dirty document glass or SPF; clean them regularly. Alternatively, the original document may be smudged or blotchy; use a clean original.
T
Tony HernandezJul 29, 2025
Why does my Sharp AL-1631 paper misfeed frequently?
- J
  Janet BeltranJul 29, 2025
  Frequent paper misfeeds in your Sharp All in One Printer can occur due to several reasons: * Using non-standard paper. Use standard paper or feed special papers through the multi-bypass tray. * Paper is curled or damp. Store paper flat in its wrapper in a dry location. * Pieces of paper inside the unit. Remove all pieces of misfed paper. * Paper guides in the paper tray are not set properly. Set the guides properly depending on the paper size. * Too much paper in the paper tray or multi-bypass tray. Remove excessive paper from the tray.
N
Nancy WilliamsAug 3, 2025
What to do if my Sharp AL-1631 All in One Printer copies are too dark or too light?
- G
  gphamAug 3, 2025
  If your copies are coming out too dark or too light on your Sharp All in One Printer, it could be due to a few reasons. Check if the original image itself is too dark or light, and if so, adjust the exposure manually. Also, examine whether the unit is in automatic exposure mode and adjust the automatic exposure level accordingly. Finally, if the unit is in photo exposure mode, try canceling it.
D
Debra JohnsonAug 8, 2025
How to fix Sharp All in One Printer when it does not operate?
- C
  Carlos CrossAug 8, 2025
  If your Sharp All in One Printer is not operating, check the following: * Ensure the unit is plugged into a grounded outlet. * Verify the power switch is turned on. * Make sure the side cover is closed securely. * Confirm that the front cover is closed, and then close the side cover.
L
luisbensonAug 12, 2025
Why do images rub off the copy easily from my Sharp AL-1631 All in One Printer?
- A
  amanda40Aug 12, 2025
  If images rub off copies easily from your Sharp All in One Printer, it may be because the paper is too heavy; use paper within the specified range. Another reason might be damp paper; replace it with dry paper. If the unit is not used for a long time, remove the paper from the paper tray and store it in its wrapper in a dry location.
E
edwardmcdonaldAug 16, 2025
What causes striped copies on Sharp AL-1631 and how to resolve it?
- T
  Tina CollinsAug 16, 2025
  Striped copies from your Sharp All in One Printer can be caused by a dirty transfer charger. Clean the transfer charger to resolve this issue.
J
Jonathan TurnerAug 21, 2025
Why does my Sharp AL-1631 All in One Printer produce blank copies?
- E
  ewatsonAug 21, 2025
  If your Sharp All in One Printer is producing blank copies, ensure that the original document is placed face down on the document glass or face up in the SPF.