How to fix dust, dirt, smudges appearing on copies from Sharp AL-1552?
If dust, dirt, or smudges appear on copies from your Sharp All in One Printer, the original table or cover might be dirty; clean them regularly. Also, the original document might be smudged or blotchy, so try using a clean original.
Why does my Sharp AL-1552 paper misfeed frequently?
Frequent paper misfeeds in your Sharp All in One Printer could be due to several reasons. Ensure you're using standard paper. If you're using special paper, try feeding it through the single bypass/multi-bypass tray. Check if the paper is curled or damp; if so, store paper flat in its wrapper in a dry location. Also, remove any pieces of paper inside the unit and make sure the paper guides in the tray are set correctly for the paper size. Finally, avoid overfilling the paper tray or multi-bypass tray.
How to troubleshoot a Sharp All in One Printer that does not operate?
If your Sharp All in One Printer isn't operating, first, ensure it's plugged into a grounded outlet and the power switch is turned on. Also, check that the side and front covers are securely closed. Close the front cover first, then the side cover.
Why are the copies from my Sharp AL-1552 All in One Printer too dark or too light?
If copies from your Sharp All in One Printer are too dark or too light, you can adjust the exposure manually. If the unit is in automatic exposure mode, adjust the automatic exposure level. If it's in photo exposure mode, cancel that mode.
What to do if images rub off the copy easily from Sharp AL-1552 All in One Printer?
If images rub off easily from copies made with your Sharp All in One Printer, it could be due to the paper being too heavy; use paper within the specified range. Another reason could be damp paper; replace it with dry paper. If the unit isn't used for a long time, remove the paper from the tray and store it in its wrapper in a dry location.
What to do if the paper tray or multi-bypass tray is empty in Sharp AL-1552 All in One Printer?
If the paper tray or multi-bypass tray is empty on your Sharp All in One Printer, load paper into the tray.
Why my Sharp All in One Printer produces blank copies?
If you're getting blank copies from your Sharp All in One Printer, make sure the original is placed face down on the original table or face up in the SPF/RSPF.
How to close the side cover on Sharp AL-1552?
If the side cover of your Sharp All in One Printer is open, close it securely by pressing the round projections near the side cover open button.
How to fix striped copies from Sharp All in One Printer?
If you're getting striped copies from your Sharp All in One Printer, the transfer charger might need cleaning. Clean the transfer charger.
How to cancel preheat mode on Sharp AL-1552 All in One Printer?
If your Sharp All in One Printer is in preheat mode, press any key to cancel it.
General| Brand | Sharp |
|---|---|
| Model | AL-1552 |
| Category | All in One Printer |
| Language | English |
To Next Page
