10
INSTALLING THE TD CARTRIDGE
1
Open the multi-bypass tray
(AL-1553, AL-1555, p.17),
and then open the side
cover.
2
Push gently on both sides of the
front cover to open the cover.
3
Remove the TD cartridge from the bag. Hold the cartridge on
both sides and shake it horizontally four or five times. Hold the
tab of the protective cover and pull the tab to your side to
remove the cover.
4
Gently insert the TD cartridge
until it locks in place while
pushing the lock release button.
4 or 5 times
To Next Page
Loading...
