11 12
PC compatibility chart
Resolution
Horizontal
Frequency
Vertical
Frequency
VESA Standard
Analogue
(D-Sub)
Digital (HDMI)
VGA
640
g
480
31.5 kHz 60 Hz
SVGA
800
g
600
37.9 kHz 60 Hz
XGA
1024
g
768
48.4 kHz 60 Hz
WXGA
1360
g
768
47.7 kHz 60 Hz
1080P
1920
g
1080
67.5 kHz 60 Hz
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA, SVGA, XGA and WXGA are registered trademarks of International Business Machines Corporation.
Teletext function
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
News, weather reports, sports information, stock
exchange prices and programme previews are
among the many services available.
NOTE
• If you select a programme with no Teletext signal,
“No Teletext available.” is displayed.
• The same message displays during other modes if no
Teletext signal is available.
Button functions
Buttons Description
CH (
r
/
s
)
Increase or decrease the page number.
Colour (Red/
Green/
Yellow/Blue)
You can select a group or block of
pages displayed in the coloured brackets
at the bottom of the screen by pressing
the corresponding Colour (Red/Green/
Yellow/Blue) on the remote control
unit.
0 – 9
Directly select any page from 100 to 899
by using 0 – 9.
k
(Reveal
hidden for
TELETEXT)
To reveal hidden information such as an
answer to a quiz.
3
(Hold)
To stop updating Teletext pages
automatically or release the hold mode.
[
(Subtitle
for
TELETEXT)
Display the subtitle during Teletext page.
• Subtitle will not be displayed when the
service does not contain subtitle information.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
USB Media Player
H
Selecting modes
Photo
USB Media
MusicVideo
1
Press INPUT to select the “USB” mode.
2
Press
c
/
d
to select “Video”, “Music” or
“Photo”, and then press ENTER.
3
Press
c
/
d
to select your USB directory, and
then press ENTER.
4
Press
a
/
b
/
c
/
d
to select the desired folder,
and then press ENTER.
NOTE
• “Wide mode” is fi xed during “Photo” and “Music”.
• Depending on the USB device, the TV may not be able to
recognise the contained data.
• A fi le name with more than 10 characters may not be
displayed all (depending on the character set).
• Files in USB 1.1 devices may not be played properly.
• Operation using USB hubs is not guaranteed.
• The compatibility of USB HDDs may not be guaranteed.
• USB only support device up to DC5V 2A.
Switching the analogue audio format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
PAL broadcast signal
In the NICAM TV broadcasts
Stereo mode
MONONICAM STEREO
Bilingual mode
NICAM DUAL II
MONO NICAM DUAL I + II
NICAM DUAL I
Monaural mode
MONONICAM MONO
In the TV mode of A2 TV broadcasts
Stereo mode
MONOSTEREO
Bilingual mode
DUAL II
DUAL I + II
DUAL I
NTSC broadcast signal
Stereo + SAP mode
SAP (ST)
MONO
ST (SAP)
MONO + SAP mode
SAPMONO
Stereo mode
MONOSTEREO
NOTE
• On-screen display in this operation manual are for
explanation purpose and may vary slightly from actual
on-screen display.
4T-C60CH1X_H375_EN.indd 64T-C60CH1X_H375_EN.indd 6 2/25/2020 2:36:14 PM2/25/2020 2:36:14 PM
To Next Page
Loading...
Need help?
General