To Next PageTo Next PageWhat to do if my Sharp Aquos LC-20B8U LCD TV remote control does not work?
If the remote control for your Sharp LCD TV isn't working, try these steps: * Check the batteries in the remote control to make sure they are not depleted. * Ensure that the remote sensor window on the TV is not exposed to strong lighting, as this can interfere with the signal.
What to do if my Sharp Aquos LC-20B8U has no sound?
If there is no sound on your Sharp LCD TV, please check the following: * Make sure the volume is not set to the minimum. * Ensure the sound is not muted. * Verify that headphones are not connected to the TV.
What to do if my Sharp Aquos LC-20B8U LCD TV has no picture or sound, just noise?
If your Sharp LCD TV shows no picture or sound, just noise, bad reception could be the problem. Ensure the antenna cable is properly connected.
How to fix a dark picture on my Sharp Aquos LC-20B8U LCD TV?
To brighten a dark picture on your Sharp LCD TV, try the following: * Press the BACKLIGHT button or adjust the BACKLIGHT settings. * Check the CONTRAST and BRIGHTNESS adjustments. Also, be aware that a fluorescent lamp may have reached the end of its service life.
Why is the picture light or improperly tinted on my Sharp LCD TV?
If the picture on your Sharp LCD TV is light or improperly tinted, check the color adjustment and the COLOR SYSTEM setting.
Why is there no picture or sound on my Sharp Aquos LC-20B8U LCD TV?
If your Sharp LCD TV has no picture or sound, please check the following: * Ensure the AC cord is properly inserted into the power outlet. * Verify the input mode is set to TV. * Confirm the POWER switch on the main unit is turned on. * Consider whether the reception is from a broadcasting station.
What to do if my Sharp LCD TV unit cannot be operated?
If your Sharp LCD TV unit cannot be operated, it might be due to external influences like lightning or static electricity. Try turning the power off, or unplug the AC cord and re-plug it in after 1 or 2 minutes, then try operating the unit again.
How to set the clock on my Sharp LCD TV?
If the clock on your Sharp LCD TV cannot be set automatically, it might be due to a weak broadcasted EDS signal. Check the antenna. You can also try carrying out EZ SETUP or setting the CLOCK again. If EDS signal is not sent, set the clock using MANUAL CLOCK Setting.
General| Screen Size | 20 inches |
|---|---|
| Display Type | LCD |
| Resolution | 640 x 480 pixels |
| Aspect Ratio | 4:3 |
| Brightness | 430 cd/m² |
| Contrast Ratio | 500:1 |
| HDMI Ports | 1 |
| USB Ports | 0 |
| Response Time | 16 ms |
| Viewing Angle | 170° horizontal, 170° vertical |
| Inputs | Composite |
| Weight | 13.2 lbs |
Guide to inserting batteries into the remote control for initial setup and operation.
Details on connecting various types of antennas (75-ohm, 300-ohm) to the TV for optimal reception.
Procedure for connecting the AC power cord to the TV and the wall outlet.
Identification of rear terminals and instructions for securing cables with a clamp.
Detailed layout of the remote control buttons and their corresponding functions.
Step-by-step instructions for the initial automatic setup of channels and clock.
Procedure for automatically setting the clock using EDS signals from TV stations.
Method for manually setting the clock when automatic setting is not available.
Instructions for turning the TV on, off, and placing it in standby mode.
Steps for switching between input sources and adjusting sound volume.
Methods for changing channels and navigating the TV's menu system.
Steps for connecting a PC via RGB cable and displaying images.
Examples of connecting VCRs, game systems, and audio equipment to TV terminals.
Solutions for common issues like no picture, no sound, or poor picture quality.
Information on warranty coverage, exclusions, and how to obtain service.
