Sharp Aquos LC 20D30U - Clock; Input3 Select; Mts; Setup

26
Useful Features (Continued)
Press MENU to display the Menu screen.
Press
\
/
|
to select “SETUP”.
Press
'
/
"
to select the desired item, and press ENTER.
SETUP � � � OPTION
C H � S E T U P
M T S
C L O C K
I N P U T 3 � S E L E C T
V ﾐ C H I P � B L O C K
C L O S E D � C A P T I O N
C O L O R � S Y S T E M
H D M I � S E T U P
P C � S E T U P
L A N G U A G E
Press
'
/
"
to change the setting, and press ENTER.
Press MENU to exit.
*
1
“INPUT3 SELECT” cannot be set when “INPUT3” is selected in “WAKE-UP TIMER” in the OPTION menu.
*
2
TV mode:
The LCD TV set is factory set to comply with the color system in the United States (NTSC-N358).
For Brazil (PAL-M), Argentina (PAL-N) or Uruguay (PAL-N), adjust the color system before using the LCD TV set.
For details about the following items, refer to each indicated page.
• CH SETUP ........................Page
25
• CLOCK ..............................Pages
16 and 17
• V-CHIP BLOCK .................Pages
27 to 30
• CLOSED CAPTION .......... Page
31
• HDMI SETUP .................... Page
32
• PC SETUP ........................ Page
38
3
1
2
5
4
Selected item Factory setting Setting options
MTS [STEREO] Stereo audio [SAP] Secondary audio program
[MONO] Monophonic audio
INPUT3 SELECT*
1
[IN]
INPUT3/OUTPUT terminals selected as input
terminals
[OUT FAO]
Line output is selected, output volume is fixed,
speaker output is available.
[OUT
VAO]
Line output is selected, output volume is variable,
speaker output is mute.
COLOR SYSTEM TV mode
*
2
: N358/PAL-M/PAL-N
INPUT mode
(INPUT2/INPUT3) : N358/N443/PAL/PAL-M/PAL-N/SECAM/PAL60/AUTO
•
When the INPUT1 (COMPONENT), INPUT4 (HDMI) or INPUT5 (PC) mode is selected , this function cannot
be set.
LANGUAGE [ENGLISH] [ESPAÑOL]
[FRANÇAIS]
SETUP
LC-20D30U_E_book.indb 26 2005/12/15 11:27:00