Sharp Aquos LC-32M400X

17
H
Switching subtitle languages (DVB Subtitle)
Each time you press
[
on the remote control,
the subtitle switches when the broadcast contains
subtitle information.
Set “Hearing impaired” to “On”
(Hearing impaired) 1st Language
2nd Language
Off
••••••••
Set “Hearing impaired” to “Off”
1st Language 2nd Language
(Hearing impaired)
Off
••••
NOTE
• This function is valid only if broadcaster is transmitting
multilingual subtitles.
H
Time zone
This function enables you to select your local time
zone.
1
Press MENU and the MENU screen
displays.
2
Press
c
/
d
to select “Digital setup”.
3
Press
a
/
b
to select “Time zone”, and then
press ENTER.
4
Press
c
/
d
to select the desired time zone
and then press ENTER.
• This function lets you select the right time zone in case the
time displayed in the EPG does not match the local time of
your area.
H
Summer time
When the Summer time is set to “On”, the Standard
Time is plus one hour. (Auto, On, Off)
H
OAD setup
• This function is for automatically download the
data for the version update software over digital
broadcasts when the “OAD setup” is set to “On”.
• To download, follow the instructions when the
download message appears during a digital
broadcast.
CAUTION
• Do not disconnect the AC cord when the software
upgrade is in progress, as this may cause the
upgrade to fail. If problem arises ask a qualifi ed
service personnel before the software upgrade
period expires.
Digital setup menu
Option
Audio language
Subtitle language
Hearing impaired
Time zone
Summer time
OAD setup
[Off]
[Off]
[Off]
Digital setup
H
Selecting the language
Set up to two preferred multi audio languages to
display if the audio languages are available.
1
Press MENU and the MENU screen
displays.
2
Press
c
/
d
to select “Digital setup”.
3
Press
a
/
b
to select “Audio language”, and
then press ENTER.
4
Press
a
/
b
to select “1st Language” or “2nd
Language”, and then press ENTER.
5
Press
a
/
b
/
c
/
d
to select the desired
language, and then press ENTER.
NOTE
• If audio for the selected languages is not included in
a received broadcast, audio will not be output for that
language.
H
Displaying subtitles for the hearing impaired
You can display subtitles for the hearing impaired in
the Teletext broadcast if the subtitle languages are
available.
1
Press MENU and the MENU screen
displays.
2
Press
c
/
d
to select “Digital setup”.
3
Press
a
/
b
to select “Subtitle language”,
and then press ENTER.
4
Press
a
/
b
to select “1st Language” or “2nd
Language”, and then press ENTER.
5
Press
a
/
b
/
c
/
d
to select the desired
language, and then press ENTER.
NOTE
• If subtitles for the selected language are not included in
a received broadcast, subtitles will not be shown for that
language.
LC32M400X_EN_CS2_A5.indd 17LC32M400X_EN_CS2_A5.indd 17 6/9/2011 2:35:09 PM6/9/2011 2:35:09 PM