EasyManua.ls Logo

Sharp AQUOS LC-37A65M

Sharp AQUOS LC-37A65M
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
Co
nnecting an HDMI output device
Settings when using external devices
HDMI terminals can carry audio and visual signals to the TV with an HDMI certifi ed cable. When you want to
output the audio and picture from an HDMI output device on the TV, select “INPUT1”, “INPUT2” or “INPUT3” by
switching the input source.
Settings when using HDMI output devices
To watch an HDMI equipment image, select
“INPUT1”, “INPUT2” or “INPUT3” using TV/
VIDEO on the remote control unit or on the
TV.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “HDMI Auto View”, and
then press ENTER.
The HDMI Auto View can be selected only when
“INPUT1”, “INPUT2” or “INPUT3” is selected.
4
MENU
[
Setup
...
HDMI Auto View
]
Setup Option
Child Lock
Input Skip
Input Label
Auto Installation
Programme Setup
Position
[DVD]
HDMI Auto View [Enable]
H HDMI (High-Defi nition Multimedia Interface)
Auto View
Press
c
/
d
to select the desired item, and
then press ENTER.
5
NOTE
Refer to your external equipment operation manual for the
above settings.
When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminal, the image may not come in clearly.
“HDMI Audio Select” is only available for INPUT1.
Selected items Description
Enable /
Disable
Set whether or not to use WIDE MODE
based on signal recognition, including an
HDMI signal.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “HDMI Audio Select”,
and then press ENTER.
The HDMI Audio Select can be selected only
when “INPUT1” is selected.
3
Option
HDMI Audio Select
Output Volume Select
Audio Only
AQUOS LINK Setup
Input Select
Colour System
Fine Sync.
[On]
[Fixed]
[Digital]
Game Play Time
H HDMI Audio Select
Press
c
/
d
to select the desired setting, and
then press ENTER.
4
Selected items Description
Digital/
Analogue
Select “Digital” for audio signal via the
HDMI terminal.
Select “Analogue” for audio signal via the
AUDIO jack.
HDMI output
device
HDMI cable (commercially available)
37A65M_en_f.indd 3737A65M_en_f.indd 37 8/18/2008 9:34:10 AM8/18/2008 9:34:10 AM

Table of Contents

Related product manuals