EasyManua.ls Logo

Sharp AQUOS LC-40LE814E

Sharp AQUOS LC-40LE814E
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
Connecting an AQUOS BD player/AQUOS recorder via
the AQUOS AUDIO speaker system
AQUOS BD player/AQUOS
recorder
AQUOS AUDIO speaker system
n HDMI-certified cable
o Optical audio cable
Connecting an AQUOS BD
player/AQUOS recorder
only
AQUOS BD player/AQUOS recorder
* TheARC(AudioReturnChannel)function
worksonlywhenusingtheHDMI1
terminal.
AQUOS LINK setup
Basic operation
Go to “Menu” > “Link operation” > “AQUOS
LINK setup” > select the menu you want to
set.
AQUOS LINK control
Setto“On”toenableHDMICECfunctions.
Auto power on
Ifthisisactivated,theonetouchplayfunctionisenabled.
WhiletheTVisinstandbymode,itautomaticallyturnson
andplaysbacktheimagefromtheHDMIsource.
NOTE
• Thefactorydefaultforthisitemis“Off”.
Selecting recorder
Here,youcanselectarecorderfortherecordingfrom
severalconnectedrecorders.
NOTE
• IfyouhaveconnectedtheAQUOSAUDIOspeakersystem
betweentheTVandanAQUOSrecorder,theexternalsource’s
indicationchanges(e.g.,from“HDMI1”to“HDMI1(Sub)”).
Selecting channel key
Thisfunctionallowsyoutoselectthechannelofthe
connectedHDMIdeviceusingtheTV’sremotecontrol
unit.
1 Press a/b to select the input source of the
connected HDMI device you want to control
using the TV’s remote control unit, and then
press ;.
2 Press c/d to select “On”, and then press
;.
Using genre info
Thisfunctionallowsyoutoautomaticallyswitchto
theappropriatesoundmodedependingonthegenre
informationincludedthedigitalbroadcast.
Audio return channel (ARC)
Ifthisfunctionissetto“Auto”,theTVcansendaudio
dataforvideocontentshownontheTVtoaconnected
audiodevicewithjustoneARC-compatiblecable.Using
thisfunctioneliminatestheneedtouseaseparatedigital
oranalogueaudiocable.
Connection for using “Audio return channel”
• YouneedtouseARC-compatiblecables/devicesandconnect
totheHDMI1terminaltoactivatethisfunction.Theconnection
methodisthesameastheaboveConnecting an AQUOS BD
player/AQUOS recorder only.
AQUOS LINK

Related product manuals