Sharp AQUOS LC-40LE814E

34
Channel settings
Setup
Quick start
Auto installation
View setting
Channel settings
CH list
:Back:Enter
Menu
Individual setting
View setting
Auto installation
TheTVautomaticallydetectsandstoresallavailable
servicesinyourarea.Thisfunctionalsoallowsyouto
performthechannelsettingfordigital,satelliteand
analogueindividuallyandreconfigurethesettingsafter
theinitialautoinstallationhasbeencompleted.
1 Go to “Menu” > “Setup” > “View setting” >
“Auto installation”.
2 Press c/d to select “Yes”, and then press
;.
3 Press a/b/c/d to select the desired
language, and then press ;.
NOTE
• PINinputisrequiredwhenexecuting“Autoinstallation”.The
defaultPINis“1234”.TochangethePINsetting,referto
Password/Lock settings(Page37).ToclearthePINsetting
(PINinputwillnolongerbeneeded),refertoCLEARING THE
PIN(Page59).
• YoucannotsettheHome/Storesettingandthecountry
settingin“Autoinstallation”inthe“Setup”menu.Ifyouwant
toreconfigurethosesettings,automaticallyexecuteinitialauto
installationafterexecuting“Reset”fromthe“Setup”menu.
• Thecurrentcountrysettingisdisplayedonthescreen.
4 Press a/b to select the broadcast standard
you want to search, and then press ;.
E Digital search
After selecting the service you want to search,
either “Terrestrial” or “Cable”, refer to Digital
broadcast setting on pages 13_14.
E Analogue search
The TV searches for, sorts and stores all the
receivable TV stations. Refer to Analogue
broadcast setting on page 14.
E Satellite search
After selecting “Satellite search”, the current
DVB-S/S2 setting screen is displayed. Refer
to the “Satellite search” setting on pages 15_16.
NOTE
• Afterselecting“Next”intheDVB-S/S2settingscreen,youneed
toselectyourpreferredsatellitebroadcasttostartsearching.
View setting
Programme setup
YoucanreconfiguretheDTVservicesettings
automaticallyormanually.
1 Go to “Menu” > “Setup” > “View setting” >
“Channel settings” > “Programme setup”.
2 Press a/b to select the broadcast standard
you want to reconfigure, and then press ;.
NOTE
• PINinputisrequiredwhenexecuting“Programmesetup”.
ThedefaultPINis“1234”.TochangethePINsetting,referto
Password/Lock settings(Page37).ToclearthePINsetting
(PINinputwillnolongerbeneeded),refertoCLEARING THE
PIN(Page59).
Digital setting
Terrestrial
Youcanreconfigurethefollowingsettingswhenyou
select“Terrestrial”intheinitialautoinstallationorthe
“Autoinstallation”menu.
E Additional search
Usethismenutoaddnewservicesautomaticallyafter
“Digitalsearch”inthe“Autoinstallation”menuhasbeen
completed.
E Manual search
Addnewserviceswithinaspecifiedfrequencyband.
• Enterthefrequencyusing0_9numericbuttons.
• Youcanperform“Manualsearch”withaservicenumberonly
whenthefiveNordiccountrieshavebeenselectedinthe
countrysetting.
Basic adjustment