Sharp AQUOS LC-40LE814E

40
Useful viewing functions
Display information regarding time shift
Channel display
Channelinformationdisplaysbypressingpontheremote
controlunit.
Audio (ENG) STEREO
Video
Subtitle Off
>> New information
n The time shift ready icon shows up when
READY is pressed and the TV is recording the
programme.
o The status icon shows up depending on what is
shown on the screen.
Counter
Thecounterdisplayswhenyouset“On”in“DisplaytheTime
shiftmemory”(Goto“Setup”>“Option”>“Timeshiftsetting”).
Time shift
Memory used:
n The grey bar shows how much memory is in use.
o This blue point shows how much time has
progressed.
p “FULL” shows up when the grey bar reaches
the right edge. The TV starts overwriting the
previously recorded data.
NOTE
• Youcanalsocalluptheinformationabovebypressing
CONTROLontheremotecontrolunitorselect“Control(Time
shift)”from“Option”>“Optionforview”.
Option
Auto input selection
Youcanchoosewhetherornottoswitchtheinput
sourceautomaticallywhenreceivinganAQUOSLINKor
anEuroSCARTcompatiblesignalontheTVduringtime
shiftoperations.
Go to “Menu” > “Setup” > “Option” > “Time
shift setting” > “Auto input selection”.
Item
Enable
Releasetimeshiftwhenreceiving
anAQUOSLINKoraEuroSCART
compatiblesignal.Switchinputsource
automatically.
Disable
Timeshiftcontinuestowork.The
TVdoesnotswitchinputsource
automaticallyevenwhenreceiving
anAQUOSLINKoraEuroSCART
compatiblesignal.