Sharp AQUOS LC-40LE814E

42
Selecting the recording picture
size manually
Option
REC picture size
Youcanusethismenutosettheappropriatepicturesize
forviewinga16:9formatTVprogrammeona4:3TV.
Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “REC picture size”.
Setting to “4:3 TV” Setting to “16:9 TV”
NOTE
• Thisfunctionmustbesetbeforerecording.
Selecting the HDMI picture size
automatically
Option
HDMI auto view
Thisfunctionallowsyoutoautomaticallychangetothe
appropriatepicturesizewhenviewinganHDMIsignal
usingtheHDMI1,2,3and4terminals.
1 Press b to select the input source (“HDMI
1”, “HDMI 2”, “HDMI 3” or “HDMI 4”)
connected to your HDMI device, and then
press ;.
2 Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “HDMI auto view”.
Adjusting image position
Option
Position
Foradjustingapicture’shorizontalandverticalposition.
Go to “Menu” > “Setup” > “Option” > “Screen
effect” > “Position”.
Item
H-Pos.
Centrestheimagebymovingittothe
leftorright.
V-Pos.
Centrestheimagebymovingitupor
down.
NOTE
• Adjustmentsarestoredseparatelyforeachinputsource.
• Dependingontheinputsignaltype,“Widemode”settingor
“Videomode”fortheUSBmode,apositionsettingmaynot
beavailable.
• ThisfunctionisnotavailableforDTV/SATbroadcastswith
MHEGsignals.
Useful viewing functions