Sharp AQUOS LC-40LE814E

51
Adjusting the PC image
automatically
Option
Auto sync.
Thisfunctionenablesthescreentobeautomatically
adjustedtoitsbestpossibleconditionwhentheanalogue
terminalsoftheTVandPCareconnectedwitha
commerciallyavailableDVI/RGBconversioncable,etc.
1 Press b to select “EXT 3” from the “INPUT”
menu, and then press ;.
2 Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “Input select” > select
“RGB”.
3 Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “PC input” > “Auto sync.”.
NOTE
• When“Autosync.”issuccessful,“AutoSynccompleted
successfully”displays.Ifnot,“Autosync.”failed.
• “Autosync.”mayfailevenif“AutoSynccompleted
successfully”displays.
• “Autosync.”mayfailifthePCimagehaslowresolution,has
unclear(black)edges,orismovedwhileexecuting“Auto
sync.”.
• BesuretoconnectthePCtotheTVandswitchitonbefore
starting“Autosync.”.
• “Autosync.”canbeexecutedonlywheninputtinganalogue
signalsthroughtheEXT3terminal.
Adjusting the PC image manually
Option
Fine sync.
Ordinarilyyoucaneasilyadjustthepictureasnecessary
tochangeimagepositionusing“Autosync.”.Insome
cases,however,manualadjustmentisneededto
optimisetheimage.
1 Press b to select “EXT 3” from the “INPUT”
menu, and then press ;.
2 Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “Input select” > select
“RGB”.
3 Go to “Menu” > “Setup” > “Option” >
“Terminal setting” > “PC input” > “Fine sync.”.
4 Press a/b to select the specific adjustment
item.
5 Press c/d to adjust the item to the desired
position.
Item
H-Pos.
Centrestheimagebymovingittothe
leftorright.
V-Pos.
Centrestheimagebymovingitupor
down.
Clock
Adjustswhentheimageflickerswith
verticalstripes.
Phase
Adjustswhencharactershavelow
contrastorwhentheimageflickers.
NOTE
• Forresettingalladjustmentitemstothefactorypresetvalues,
pressa/btoselect“Reset”,andthenpress;.
• “Clock”and“Phase”inthe“Finesync.”menucanbeadjusted
onlywheninputtinganaloguesignalsthroughtheEXT3
terminal.
PC compatibility chart
Resolution
Horizontal
frequency
Vertical
frequency
Analogue
(D-Sub)
Digital (HDMI) VESA standard
VGA 640x480 31.5kHz 60Hz
✔ ✔ ✔
SVGA 800x600 37.9kHz 60Hz
✔ ✔ ✔
XGA 1,024x768 48.4kHz 60Hz
✔ ✔ ✔
WXGA 1,360x768 47.7kHz 60Hz
✔ ✔ ✔
SXGA 1,280x1,024 64.0kHz 60Hz
✔ ✔ ✔
SXGA+ 1,400x1,050 65.3kHz 60Hz
✔ ✔ ✔
UXGA 1,600x1,200 75.0kHz 60Hz
✔ ✔ ✔
1080p 1,920x1,080 67.5kHz 60Hz
✔ ✔
VGA,SVGA,XGA,WXGA,SXGA,SXGA+andUXGA
areregisteredtrademarksofInternationalBusiness
MachinesCorporation.
NOTE
• ThisTVhasonlylimitedPCcompatibility,correctoperationcan
onlybeguaranteedifthevideocardconformsexactlytothe
VESA60Hzstandard.Anyvariationsfromthisstandardwill
resultinpicturedistortions.
Connecting a PC