Sharp AQUOS LC-40LE814E

55
Network setup
Wireless installation
UsethewirelessLANUSBadaptersuppliedwiththeTV.
E Wireless connection overview
n PC
o Wireless LAN router/access point
p Wireless LAN USB adapter (supplied)
q Network
NOTE
• WhenusingtheSHARPwirelessLANUSBadapter(supplied),
trytoprovideasmuchfreespacearoundthedeviceforbest
performance.
• MakesurethefirewallsinyournetworkallowsaccesstotheTV
wirelessconnection.
• Operationscannotbeguaranteedwhenusedwithaccess
pointsthatdonothaveWi-Fi®certification.
• AwirelessLANaccesspointisrequiredtoconnecttheTVto
theInternetusingawirelessLAN.Seetheoperationmanualof
youraccesspointforsetup.
E How to connect
1 Switch on your router before starting the
network installation.
2 Connect the wireless LAN USB adapter
(supplied) to the USB port on the TV.
• DonotuseawirelessLANadapterotherthanthe
suppliedSHARPwirelessLANadapter,asoperations
cannotbeguaranteed.
3 Go to “Menu” > “Setup” > “View setting” >
“Network setup” > “Country”.
4 Press a/b/c/d to select your country or
area, and then press ;.
5 Press a/b to select “Connection type” in the
“Network setup” menu.
6 Press c/d to select “Wireless”, and then
press ;.
7 Select “OK” to confirm.
8 Press a/b to select “Wireless setup” in the
“Network setup” menu.
9 Press c/d to select “Change”, and then
press ;.
0 Press a/b to select “WPS”, and then press
;.
• Ifyourrouter/accesspointdoesnotsupportWPS(=
Wi-FiProtectedSetup),select“Search”andfollowthe
on-screeninstructionsandtheoperationmanualofthe
router/accesspoint.
• Toestablishtheconnectionmanually,select“Manual
setup”andfollowtheon-screeninstructionsandthe
operationmanualoftherouter/accesspoint.
WPS
Search
Manual Setup
Q Press a/b to select “Push button”, and then
press ;.
• Toestablishtheconnectionmanually,select“PINcode”.
Followtheon-screeninstructionsandtheoperation
manualoftherouter/accesspoint.
Push button
PIN code
W Select “Next” to proceed.
E Press the WPS button on the router/access
point. When you press the WPS button, a
progress bar will appear on the display. Wait
until the connection is established.
R Select “OK” when the connection details are
displayed.
• Ifyouhavefailedtoconnecttotheinternetintheabove
operation,anerrormassagewillappear.Inthiscase,
pressATV/DTV/SAT/b toreturntothenormalTV
screenandchecktherelevantsettings.
NOTE
• ToconnectyourTVtotheinternet,youmusthaveabroadband
internetconnection.
• Ifyoudonothaveabroadbandinternetconnection,consultthe
storewhereyoupurchasedyourTVoraskyourinternetservice
providerortelephonecompany.
• Thereisnoneedtoenterthesecuritykeyforsubsequent
connectionstothewirelessnetwork.
• Ifyouraccesspointissettoastealthmode(thatprevents
detectionbyotherdevices),youmaynotbeabletoestablish
aconnection.Inthiscase,disablethestealthmodeonthe
accesspoint.
• TochangeawirelessLANconnectionsettings,goto“Menu”>
“Setup”>“Viewsetting”>“Networksetup”>“Wirelesssetup”.
• Seepage66tocheckthesuppliedSHARPwirelessLANadapter
specifications.