Sharp AQUOS LC-42D64U

QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
• It's best to use 2 people to remove the AQUOS television for stability.
• Lift onto installation location
as the diagram illustrates.
Ventilation & Cleaning Tips
Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use near
water. The AQUOS television
is designed for AC use only and should be used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and
avoid pressing on the screen. To clean the outer cabinet, use the same method.
Do not use
liquid or aerosol cleaners.
The screen
is glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
Attach your antenna to the back of the AQUOS
television.
(See page 12.)
Connect the AC plug for the AQUOS television
into the AC outlet.
--------.,\or----~ .. lAC outlet I
• Place the 1V close to the AC outlet, and keep the power
plug within reach.
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
Place the Ferrite core in the space indicated in
the below figure and bundle the cords properly
with the cable clamp and the cable tie.
Ferrite core
How to turn on the AQUOS television for the
first time.
A) Press POWER on the AQUOS television.
I
Power
B) The POWER indicator on the front of the
AQUOS television lights GREEN.
----------'tj
POWER SLEEP ope
o 0 0 0
POWER indicator
• Speakers cannot be detached from the 1V.
•
1V angle cannot be adjusted.
@-7
QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
• It's best to use 2 people to remove the AQUOS television for stability.
• Lift onto installation location
as the diagram illustrates.
Ventilation & Cleaning Tips
Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use near
water. The AQUOS television
is designed for AC use only and should be used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and
avoid pressing on the screen. To clean the outer cabinet, use the same method.
Do not use
liquid or aerosol cleaners.
The screen
is glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
Attach your antenna to the back of the AQUOS
television.
(See page 12.)
Connect the AC plug for the AQUOS television
into the AC outlet.
--------.,\or----~ .. lAC outlet I
• Place the 1V close to the AC outlet, and keep the power
plug within reach.
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
Place the Ferrite core in the space indicated in
the below figure and bundle the cords properly
with the cable clamp and the cable tie.
Ferrite core
How to turn on the AQUOS television for the
first time.
A) Press POWER on the AQUOS television.
I
Power
B) The POWER indicator on the front of the
AQUOS television lights GREEN.
----------'tj
POWER SLEEP ope
o 0 0 0
POWER indicator
• Speakers cannot be detached from the 1V.
•
1V angle cannot be adjusted.
@-7