QUICK REFERENCE
If
the remote control fails to operate TV functions, replace the batteries
in
the remote control unit.
1 Open the battery cover.
2 Insert
two
"MA"
size batteries
(supplied with the product).
• Place the batteries with their terminals
corresponding to the (+)and (- )
indications
in
the battery compartment.
3 Close the battery cover.
Improper use of batteries can result
in
chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage
in
old batteries.
• Remove batteries
as
soon
as
they are worn out. Chemicals that leak from batteries that come
in
contact with skin can cause
a rash.
If
you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
•
If
you will not be using the remote control unit for
an
extended period of time, remove batteries from
it.
Remote control sensor
r
POWER SLEEP
o 0
IMPORTANT:
The POWER indicator on the AQUOS television should light GREEN indicating you have
power to the AQUOS television.
If
the POWER indicator on the AQUOS television still does not light up, press TV POWER
on the remote control to turn the power on.
TV
6"
VgR
AUgrO
CBLlSATDVD
FUNCTION
o 0 0
SSE
8
ffi
B G 8
000
8 8
@ID
IMPORTANT:
IF
THE UNIT DOES NOT POWER
ON
- UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT
THE INSTALLATION STEPS.
IF
YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
Please refer to the BASIC ADJUSTMENT SETIINGS SECTION for
EZ
Setup and basic channel setup functions
and USING EXTERNAL EQUIPMENT SECTION for other device connections
(DVD,
VCR, AUDIO, etc.)
in
your
AQUaS
operation manual.
®)-
8
QUICK REFERENCE
If
the remote control fails to operate TV functions, replace the batteries
in
the remote control unit.
1 Open the battery cover.
2 Insert
two
"MA"
size batteries
(supplied with the product).
• Place the batteries with their terminals
corresponding to the (+)and (- )
indications
in
the battery compartment.
3 Close the battery cover.
Improper use of batteries can result
in
chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage
in
old batteries.
• Remove batteries
as
soon
as
they are worn out. Chemicals that leak from batteries that come
in
contact with skin can cause
a rash.
If
you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
•
If
you will not be using the remote control unit for
an
extended period of time, remove batteries from
it.
Remote control sensor
r
POWER SLEEP
o 0
IMPORTANT:
The POWER indicator on the AQUOS television should light GREEN indicating you have
power to the AQUOS television.
If
the POWER indicator on the AQUOS television still does not light up, press TV POWER
on the remote control to turn the power on.
TV
6"
VgR
AUgrO
CBLlSATDVD
FUNCTION
o 0 0
SSE
8
ffi
B G 8
000
8 8
@ID
IMPORTANT:
IF
THE UNIT DOES NOT POWER
ON
- UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT
THE INSTALLATION STEPS.
IF
YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
Please refer to the BASIC ADJUSTMENT SETIINGS SECTION for
EZ
Setup and basic channel setup functions
and USING EXTERNAL EQUIPMENT SECTION for other device connections
(DVD,
VCR, AUDIO, etc.)
in
your
AQUaS
operation manual.
®)-
8
To Next Page
Loading...
