Sharp AQUOS LC-42LE540U

31
Reactivating the temporarily released V-CHIP
BLOCK
You can reactivate the temporarily released V-CHIP
BLOCK as shown below.
•
Select "Status" setting from the Parental CTRL menu to
reactivate BLOCK. (See page 29.)
•
Select "V-Chip" setting ("MPAA", "TV Guidelines", "Can.
English Ratings" or "Can. French Ratings") from the
Parental CTRL to reactivate BLOCK. (See pages 29 to 31.)
•
Switch off the TV power.
•
Performing any of the three above will activate the V-CHIP
BLOCK.
On-Screen Display Menu
Information
Example
Menu
Identification
Network Update
Netflix Help
Vudu Help
Information
Information
1
Press MENU to display the MENU screen, and then
press
c
/
d
to select "Information".
2
Press
a
/
b
to select a specifi c adjustment item,
and then press ENTER.
3
Press
a
/
b
(or
c
/
d
) to select the desired setting,
and then press ENTER.
4
Press MENU to exit.
Identifi cation
The current version of the TV software is displayed.
Network Update
This is used to upgrade the system software to
enhance the TV functions.
press
1
Press MENU to display MENU screen, and then
c
/
d
to select “Information”.
2
Press
a
/
b
to select “Software Update”, and then
press
ENTER.
• If you have already set the Secret No., go to step 3.
Menu
Identification
Software Update
Digital Caption Info.
Information
Information
Example
3
Input the 4-digit secret number by using 0-9.
Software Update
Enter your Secret No.
4
Press
a
/
b
to select “Manual Update” or “Auto
Update Setting”, and then press ENTER.
• The operations thereafter vary depending on the setting.
Manual Update
Select the method for manually updating the software.
Network Update: Downloads the update fi le via the
network and then updates the software. (See page 32.)
• A broadband connection and Internet Setup are required to
update the software using the network.
(See pages 48 to
52.)
• It may take time to access and download the update
depending on the Internet connection and other factors.
Auto Update Setting
When the TV is on, or when an Internet application
is being accessed, this function enables the TV
to connect to the network and check for updates
automatically.
Yes: Enables Auto Update Setting.
No: Disables Auto Update Setting.
When an update is available, a message is displayed.
Press
c
/
d
to select "Yes", and then press ENTER to
display the download screen. (See page 32.)
No
Yes
• This function does not work when a broadband connection
or Internet Setup is not available.
•
A message may also be displayed when an application is
running.
The message varies depending on the application.