introduction to Connections
An NDTV without an HD source is just an ordinary "iV.
To enjoy ND images on the TV, you should get ND programming from the following:
Over-the-air broadcasting via HD quality antenna
HD cable/satellite subscription
HD compatible external equipment
• Forinformationon updatingto HD programming, ask your cable/satelliteserviceprovider.
Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your
external equipment and use its appropriate terminals for higher quality images.
For connecting the TV to external equipment, use commercially available cables.
• The illustrationsof the terminals are for explanationpurposesand mayvary slightlyfrom the actual products.
HD
Quality
H .'='tIli'111
!
®
AUDIO
®
DVI OUT
HDMI-certified cable _ _ • Page 13
3.5 mm stereo minijack cable
DVI-HDMI conversion cable
_O_PR _ Component video cable _ S
COMPONENT R-AUDIO-L
n_ _L Audio cable _ _
PR(C _} PB (C_)
AUDIO _ _ ............................................................................................................................................
=_Page 13
,,$,Page 14
Standard R_ _L _ _ AV cable
Quality AUDIO VIDEO
Page 14
To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.
1__ Example 1 Press INPUT.
The INPUT list screen displays.
• 2 Press A/T to select the input source.
iNPUT
AQUOS
NET APPS
You can also select the input source by pressing
INPUT. Each time INPUT is pressed, the input source
toggles.
HDMI1 ,_ HDMI2-_ HDMI3
t
TV _- HDMI4
An image from the selected source automatically
displays.
If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
Q-12
To Next Page
Loading...
