To Next PageTo Next PageWhat to do if my Sharp AQUOS LC-60LE650U cannot be operated?
If your Sharp LCD TV unit cannot be operated, external influences such as lightning or static electricity may cause improper operation. Turn off the power of the TV or unplug the AC cord, wait 1 or 2 minutes, and then replug it in to restore operation.
Why are some Internet functions not available from the Sharp AQUOS LC-60LE650U?
The TV has only limited functions compared with regular PC browsers.
Why is there no picture on my Sharp LCD TV?
If there is no picture on your Sharp LCD TV, ensure the connections to other components are correct. Verify that the correct input is selected. Check if "On" is selected in "Audio Only". When connecting a laptop PC to the TV, check that the display output mode of the PC is set to external monitor. Check the resolution setting on the PC to ensure a compatible signal is being input.
What to do if my Sharp AQUOS LC-60LE650U power is suddenly turned off?
If your Sharp LCD TV is suddenly turning off, check if the sleep timer is set. Review the power control settings. If the unit's internal temperature has increased, remove any objects blocking the vents or clean them.
What to do if the Sharp LCD TV remote control does not operate?
If the remote control for your Sharp LCD TV isn't working, ensure the equipment to be operated by the remote control unit is set correctly by pressing TV to set the remote control unit to the setting for operating the TV. Check that the batteries are inserted with the correct polarity, and replace them if they are worn out. Strong or fluorescent lighting may interfere with the remote. Also, check if a fluorescent light is illuminated near the remote control sensor. Finally, verify that "RC Control Lock" is not selected in "Operation Lock Out".
What to do if my Sharp LCD TV has no power?
If your Sharp LCD TV has no power, first check if you have pressed the POWER button on the remote control. Next, check if the AC power cord is disconnected. Finally, verify that the power has been turned on.
Why is my Sharp LCD TV remote control not working?
If your Sharp LCD TV remote control isn't working, ensure the equipment to be operated is set correctly by pressing TV to set the remote control unit to the setting for operating the TV. Check that the batteries are inserted with the correct polarity (+/-). Replace the batteries if they are worn out. Strong or fluorescent lighting may interfere with the remote; also check if a fluorescent light is near the remote sensor. Finally, make sure "RC Control Lock" is not selected in "Operation Lock Out".
General| Screen Size | 60 inches |
|---|---|
| Refresh Rate | 120Hz |
| Smart TV | Yes |
| HDMI Ports | 4 |
| USB Ports | 2 |
| Display Technology | LCD |
| Backlight Type | LED |
| Built-in Wi-Fi | Yes |
| Audio Output | 20W (10W x 2) |
| Resolution | 1920 x 1080 |
