B
Put the microSD memory card to the au IC Card/microSD
memory card tray with the terminal (metal) side of the
memory card turned down.
Check the direction of the microSD memory card and put it securely.
Not to let the microSD memory card lift up from the card tray.
If the microSD memory card does not fit the card tray, may cause a fault.
C
Insert the au IC Card/microSD memory card tray all the
way to the product horizontally.
◎ Make sure that the top/bottom and front/rear of the microSD memory card
are facing correctly.
Attaching it forcibly may cause damage.
◎ Do not touch the terminal part of a microSD memory card.
Removing the microSD Memory Card
Before removing a microSD memory, make sure to turn the product off.
Also, remove it with the display side turned up.
•
For details on attaching or removing the au IC Card/microSD memory card
tray, refer to “Attaching the au IC Card” (zP. 7).
A
Hook the tip of a finger into the groove and pull out the au
IC Card/microSD memory card tray.
B
Removing the microSD memory card from the au IC Card/
microSD memory card tray.
C
Insert the au IC Card/microSD memory card tray all the
way to the product horizontally.
◎ The microSD memory card may become warm after a long time use, but
this is not a fault.
Charging
Charging
When you purchase the product, the internal battery is not fully charged. Be
sure to charge the internal battery before use.
•
If the performance of the battery does not recover (e.g. the usable time after
each charge has become extremely short), the internal battery may be at the
end of service life. On the home screen → “App list screen” → [Settings] →
[System] → [About phone] → [Status] → [Battery status] to check the
charging performance of the internal battery.
•
While charging, the charging/incoming indicator illuminates in red, and the
battery icon is displayed with superimposed. When the battery is charged
to approximately 95%, the charging/incoming indicator illuminates in green.
While connecting a specified charger (sold separately) to the product even
after charging is complete (battery level is 100%), it keeps illuminating in
green.
◎ The product may become warm while charging, but this is normal.
◎ Depending on the operation procedure and usage environment, the
temperature inside the product may get high and the product may even
get heated. In such case, charging may stop for security reasons.
9
To Next Page
Loading...
