14
Charging with AC Adaptor
Use an AC Adaptor (USB Type-C quick charge AC Adaptor for
USB PD [ZSDBAS] (SB-AC20-TCPD)) (optional accessory).
For information on other peripheral devices, see SoftBank
Website.
Insert USB Type-C plug of AC Adaptor into External
Connection Jack
Raise plug on AC Adaptor and plug into outlet
Charging/Notification Lamp illuminates once charging
starts.
After charging, unplug AC Adaptor from outlet and disconnect
from handset
Charging ends.
Indications while Charging
Charging/Notification Lamp
Charging/Notification Lamp illuminates red while charging;
illuminates green when charge is almost full.
・If Charging/Notification Lamp is blinking, charging is not
working properly. Make sure that you are using Charger
and products specified by SoftBank Corp. If you are using
specified products only, contact a SoftBank Shop or
Customer Service.
Lock Screen while Charging
Charging progress appears in lock screen.
・"Charging": normal charging
・"Charging rapidly": rapid charging
・"Charging slowly": low-speed charging; handset begins
low-speed charging depending on the conditions, such as
when nearly charged.
Charging Cautions
Water Resistance
AC Adaptor is not waterproof. Never connect a USB Type-C
plug while handset or charger is wet.
Handset is water resistant; however, if a USB Type-C plug
is inserted while it is wet, liquid (tap water, beverage,
sea water, pet urine, etc.) or a foreign object adhered
to handset or a USB Type-C plug may cause overheating,
burnout, fire, malfunction, burns, etc. due to electric
shock, short-circuiting, etc.
Handling Cords
Do not pull, bend, or twist cord; may damage the cord.
About Charging Abroad
SoftBank Corp. is not liable for problems resulting from
charging handset abroad.
To Next Page
Loading...
