- 2 -
J
External connection jack
Use when connecting a
specified AC adapter (supports
USB Type-C™) (sold
separately), USB Type-C cable
(commercially available), etc. to
the product.
K
Speaker
*1
L
Camera decoration
The gap between the camera
panel and the camera
decoration is an air vent for
maintaining product
performance
*1
.
M
Wide camera lens
N
Built-in antenna
*2
O
& mark
P
Standard camera lens
Q
Wi-Fi
®
/Bluetooth
®
antenna
*2
R
Mobile light
S
Built-in/GPS antennas
*2
*1 Covering the sections with
stickers, fingers, etc. may hinder
product performance.
*2 Antennas are built into the product.
Do not cover with hand during
calls or data communication.
Doing so may affect call/
communication quality.
◎ The outer case (back) of the product cannot be removed.
Removing it forcibly may cause damage or a fault.
◎ The battery is built into the product, and cannot be removed by the
customer. To force the power off if the screen freezes etc., hold
down f and u for at least 8 seconds.
Proximity sensor/Light sensor
◎ Placing stickers, etc. over the proximity sensor/light sensor may
prevent the product from operating properly.
To Next Page
Loading...
