Preferred network mode: For details
☞
P. 174"Preferred network mode"
Access Point Names: For details
☞
P. 144"Setting an access point"
Network operators: For details
☞
P. 175"Network
operators"
Setting an access point
An access point (sp-mode) for Internet connection is
registered by default. You can add other access points
and change them if necessary.
For details of sp-mode, refer to the NTT DOCOMO
website.
(
https://www.nttdocomo.co.jp/service/spmode/ (in
Japanese only)
)
If you want to use mopera U or Business mopera Internet,
add an access point of either provider manually.
For details on mopera U, refer to the mopera U website.
(
https://www.mopera.net/ (in Japanese only)
)
1
z
z
Never set the MCC to a figure other than 440 or the
MNC to a figure other than 10. Otherwise the added
access point disappears from the screen.
1
z
2
z
3
C
4
C
5
z
z
If the settings of MCC and MNC are changed and the
added access point disappears from the screen, reset
the settings or set the access point manually.
Resetting an access point
Reset an access point to default setting.
1
z
2
z
z
When sp-mode is not subscribed or if you fail to make
automatic setting of an access point due to signal
status such as outside the service area, you are
required to set the access point again manually.
144
Handset Settings
To Next Page
Loading...
