Why is the picture quality of HD videos poor on my Sharp LCD TV?
To enjoy HD images from external equipment on your Sharp LCD TV, ensure you have set up an HDMI or component connection. If the video source is not HD quality, HD images cannot be displayed. Verify that the video source you are viewing provides HD images. Also, the HD cable/satellite set-top box may need to be configured to output HD images via cable/satellite.
What to do if my Sharp AQUOS suddenly turned off?
If your Sharp TV suddenly turns off, check if the sleep timer is activated and review the power control settings. Also, the unit's internal temperature may have increased. Ensure that there are no obstructions blocking the vents, and clean them if necessary.
How to fix a Sharp AQUOS TV remote that is not working?
If your Sharp TV remote isn't working, ensure the equipment is correctly set to be operated by the remote. Check that the batteries are inserted with the correct polarity (+, -) and replace them if they are worn out. Strong or fluorescent lighting near the remote control sensor may also interfere with its operation.
What to do if my Sharp AQUOS has no picture?
If your Sharp TV shows no picture, ensure the connection to the device is correct. If using a PC, verify that the display output mode is set to external monitor. For 4K60P signals via HDMI, the external device might not be outputting correctly; set "HDMI RGB range" to "Limit".
Why is my Sharp AQUOS not turning on?
If your Sharp TV is not turning on, first check if you have pressed the power button on the remote. Then, verify that the AC cord is properly connected and that the power is turned on.
What to do if my Sharp LCD TV has no power?
First, check if you pressed the POWER button on the remote. Then, verify that the AC cord is properly connected. Finally, ensure that the power switch is turned on.
What to do if my Sharp LCD TV remote control doesn't operate?
If the remote control for your Sharp LCD TV isn't working, first, ensure that you've pressed the TV button to set the remote for TV operation. Check that the batteries are inserted correctly, aligned with the proper polarity (+, -), and that they aren't worn out (replace if needed). Strong or fluorescent lighting may interfere with the remote sensor. Check if 'RC Control Lock' is selected in 'Operation Lock Out'.
Why does my Sharp LCD TV have strange color, light color, or color misalignment?
To correct the picture, adjust the picture tone settings. Also, the picture may appear dark if the room is too bright, so consider adjusting the room lighting.
Why does my Sharp LCD TV remote control not operate?
Try aligning the batteries in the remote control with the correct polarity (+, -), or replace the old batteries with new ones. Also, check if strong or fluorescent lighting is interfering with the remote control sensor, or if a fluorescent light is too close to the sensor.
Why is my Sharp AQUOS TV picture cut off or has sidebars?
If the picture on your Sharp TV is cut off or has sidebars, check the Display Mode adjustments to make sure the picture size is set correctly.
General| Built-in Wi-Fi | Yes |
|---|---|
| Display Technology | LCD |
| Smart TV | Yes |
| HDR | HDR10, Dolby Vision |
| Backlight Source | LED |
| Refresh Rate | 120Hz |
| Operating System | Android TV |
| Bluetooth | Yes |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Resolution | 4K Ultra HD (3840 x 2160) |
To Next Page
