Sharp AQUOS - Completing the First-Time Setup Menu

13
ENGLISH
FRANÇAIS ESPAÑOL
Completing the First-Time Setup Menu
Press the
[
]
] button on the remote to turn on the TV.
After the splash screen that displays the SHARP logo appears, begin the first-time setup menu.
Screen Task
Language and
Location
1. Using the D-pad arrows of your remote, choose your
Language
,
Country
and
Time Zone
.
2. Navigate to the Forward arrow and press
[OK]
.
End User License
Agreement
1. Press
[OK]
on your remote to select
Decline
,
Agree
or
Confirm
.
2. When you’re done, then navigate to the Forward arrow and press
[OK]
.
TV Usage
Select
Home Mode
(which appears by default) and then navigate to the Forward arrow to press
[OK]
.
NOTE
•
Store Mode
should only be selected by Retailers who plan to demonstrate the TV.
Network
Connection
If your TV does not automatically detect an Ethernet connection, then use a wireless network,
select your network from the list that displays, also you can add a hidden network. When you’re
done, move to the next screen.
Select your
Primary input
source
Select how you receive your TV channels. Choose from one of the following sources below.
•
HDMI
•
ANT/CABLE
•
AV
•
COMPONENT
•
NONE
NOTE
• If you use an antenna to receive channels, then you must complete the first-time setup
menu in order to run a channel scan.