16
SETUP
When the machine will be connected with a USB cable
(When the network expansion kit or the printer expansion kit is installed)
1
Perform steps 2 through 6 in "When
the machine is connected to a
network" (p.14).
2
Click the "Printer Driver" button.
3
Click the "Custom installation"
button.
4
When you are asked how the printer is
connected, select "Connected to this
computer" and click the "Next"
button.
5
Follow the on-screen instructions.
Read the message in the window that appears and
click the "Next" button.
When the installation completed screen appears, click
the "OK" button.
6
Click the "Close" button in the
window of step 2.
When a message appears prompting you to connect
the machine to your computer, click the "OK" button.
• If you are using Windows Vista/Server
2008/7/8 /Server 2012
If a security warning window appears, be
sure to click "Install this driver software
anyway".
• If you are using Windows Server 2003
If a warning message regarding the
Windows logo test or digital signature
appears, be sure to click the "Continue
Anyway" or "Yes" button.
After the installation, a message prompting
you to restart your computer may appear. If
this message appears, click the "Yes" button
to restart your computer.
To Next Page
Loading...
