EasyManua.ls Logo

Sharp AR-6023NV User Manual

Sharp AR-6023NV
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SERVICE MANUAL
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
NOTE FOR SERVICING
[1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[2] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
[3] CONSUMABLE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
[4] EXTERNAL VIEW AND INTERNAL STRUCTURE . . . . . . . . . . . . . . . . . . . . . . . . 4-1
[5] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
[6] SIMULATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
[7] TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
[8] FIRMWARE UPDATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[9] MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
[10] DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
[11] OPERATIONAL DESCRIPTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
[12] ELECTRICAL SECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
[13] SERVICE WEB PAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
[14] TOOL LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1
CONTENTS
CODE: 00ZAR6020VS2E
AR-6020V/6020V E
AR-6023V
AR-6020DV/6020DV E
AR-6023DV/6023DV E
AR-6020NV/6020NV E/6120NV
AR-6023NV/6023NV E
AR-6026NV/6026NV E
AR-6031NV/6031NV E/6131NV
MODEL
DIGITAL MULTIFUNCTIONAL
SYSTEM
Question and Answer IconNeed help?

Do you have a question about the Sharp AR-6023NV and is the answer not in the manual?

Sharp AR-6023NV Specifications

General IconGeneral
Print TechnologyLaser
FunctionsPrint, Copy, Scan
Print Speed23 ppm
Print Resolution600 x 600 dpi
Copy Speed23 cpm
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
ConnectivityUSB 2.0
Warm-up Time25 seconds
First Copy Time6.4 seconds
Dimensions599 x 612 x 511 mm
Memory64 MB
Max Paper SizeA3
Paper Capacity350 sheets (expandable to 1850 sheets)
Paper SizeA3, A4

Summary

Servicing Precautions and Warnings

Precautions for Servicing

General safety and handling guidelines for machine servicing.

Warning for Servicing

Critical warnings related to electrical shock, fire, and injury during servicing.

Note for Repairing or Replacing LSU

Specific procedures and warnings for replacing the Laser Scanner Unit (LSU).

[2] Specifications

[3] Consumable Parts

[5] Adjustments

General Adjustment Guidelines

General procedures and sequence for performing adjustments.

Adjustment Item List by Job Number

Lists all adjustable items with corresponding job numbers and simulation codes.

Detailed Adjustment Procedures

Step-by-step instructions for performing various machine adjustments.

ADJ 1: Process Section Adjustments

Details adjustments for the process section, including gap and bias.

ADJ 2: Mechanism Section Adjustments

Covers adjustments related to mechanism alignment and image position.

Image Position and RSPF Adjustments

Procedures for adjusting image position and RSPF copy lead edge.

Void Area and Paper Offset Adjustments

Guides for adjusting rear edge void and paper off-center.

Side Edge Void and Distortion Balance Adjustments

Instructions for side edge void area and distortion balance adjustments.

ADJ 3: Image Density Adjustment

Procedure for adjusting copy image density across different modes.

[6] Simulations

General Simulation Mode Entry

Instructions on how to enter and exit simulation mode.

List of Available Simulations

Comprehensive list of simulation codes and their functions.

Detailed Simulation Procedures

Step-by-step guides for executing various simulation functions.

[7] Troubleshooting

Error Code List and Causes

Lists error codes, their causes, and detection methods.

Error Code Details and Countermeasures

Provides detailed explanations of error codes and corrective actions.

[8] Firmware Update

Firmware Download Process

Detailed procedure for downloading firmware to the machine.

[9] Maintenance

Necessary Work for Maintenance

Key tasks before and after maintenance, including counter resets.

Maintenance List by Component Life

Lists maintenance intervals (checks, replacements) for various components.

[10] Disassembly and Assembly

Disassembly and Assembly Table by Unit

Overview of units and their corresponding parts for disassembly.

Detailed Component Disassembly Procedures

Step-by-step guides for disassembling major machine units.

[12] Electrical Section

Actual Wiring Charts for Components

Detailed wiring diagrams for fans, sensors, motors, and clutches.

Signal List and Pin Assignments

Comprehensive list of signals, their functions, connectors, and PWB assignments.

[14] Tool List

Related product manuals