AR-6020V DISASSEMBLY AND ASSEMBLY 10 – 14
(2) Paper feed clutch
1) Disconnect the harness of the paper feed clutch and remove
the paper feed clutch unit.
2) Remove the E-rings, the spacers and the shaft with the pin.
Then, remove the paper feed clutch.
(3) Paper feed roller
1) Rotate the pin of the paper feed shaft to fit the cut part of the
cassette tray. Then, remove the paper feed shaft unit.
2) Remove the paper feed roller.
(4) Separation roller
1) Remove the separation roller unit
2) Remove the E-ring, and remove the separation roller
(5) PIN sensor
1) Remove the tray
2) Remove the PIN sensor detection lever.
3) Remove the harness, then, remove the PIN sensor.
To Next Page
Loading...
