4
INSTALLING THE SOFTWARE
9
Make sure that the power of the machine
is turned on, and then connect the USB
cable. (p. 12)
Windows will detect the machine and the
Plug and Play screen will appear.
10
Begin installation of the printer driver.
"SHARP AR-XXXX" will appear in the "Found
New Hardware Wizard" dialog box. Select
"Install the software automatically
(Recommended)" and click the "Next" button.
Follow the on-screen instructions.
This completes the installation of the
software.
After installation, see "CONFIGURING THE
PRINTER DRIVER" (p. 13) to check the printer
driver settings.
If you are running Windows 2000/XP
and a warning message appears
regarding the Windows logo test or
digital signature, be sure to click
"Continue Anyway" or "Yes".
Caution
!!install_ar230270.book 4 ページ ２００４年２月１９日 木曜日 午後１時１７分
To Next Page
Loading...
